How to clean and maintain the electric integrated operating table?

Views : 354
Author : Howell Medical
Update time : 2022-05-31 12:05:06

Although the electric integrated operating table provides convenience for physicians during use, many hospitals do not pay much attention to the cleaning and maintenance of the operating table. However, in order to ensure that the electric comprehensive operating table can have a long service life, the following will introduce the cleaning and maintenance methods of the operating table.

 

1. Check whether the power cord and power switch indicator light included in each plug are normal; whether the hand controller socket is tripped or not locked; whether the bed surface fastening bolts are locked.

2.Check whether the accessories such as the bed board, back board, touch board and bedside fastening bolts are in good condition

3.Since the electric integrated operating table adopts hydraulic pressure, the fuel tank should be checked frequently. Lower the bed surface to the lowest level, check the remaining amount of hydraulic oil in the oil tank (it should be kept above the oil level line), and observe whether the oil is emulsified due to long-term use. If it is emulsified, it should be replaced immediately (the oil should be changed every 2 years )

4.Because the operating table is used every day, and sometimes several operations are performed a day, the operating table must be kept clean and hygienic during long-term use. After the operation is completed, be sure to cut off the power supply, clean the outside of the operating bed, remove the residual blood stains and dirt from the operation, and spray disinfectant.Do not use strong corrosive or acidic cleaners and disinfectants, and it is also strictly forbidden to rinse with water。 When rinsing and disinfecting the floor, the bottom wheel of the operating table should be dropped and pushed to a dry place to prevent the interior from getting wet.

 

The above is how to clean and maintain the electric integrated operating table. If you have any other questions, we are happy to answer  for you.

The electric OT table is equipped with high-quality electric actuators, and the table is stable. Constant speed operation, no noise, and normal operation even at low voltage. This electric OT table is suitable for all types of surgery, general surgery, vascular surgery, cardiology, neurology, urology, gynecology, proctology, laparoscopy, trauma surgery, dental surgery, plastic surgery, etc.
electric surgical table

在线客服